Electrocatalytic Hydrogen Evolution Using A Molecular Antimony Complex under Aqueous Conditions: An Experimental and Computational Study on Main-Group Element Catalysis

Electrocatalytic hydrogen gas production is considered a potential pathway towards carbon-neutral energy sources. However, the development of this technology is hindered by the lack of efficient, cost-effective, and environmentally benign catalysts. In this study, a main-group-element-based electrocatalyst, SbSalen , is reported to catalyze the hydrogen evolution reaction (HER) in an aqueous medium. The heterogenized molecular system achieved a Faradaic efficiency of 100 % at −1.4 V vs. NHE with a maximum current density of −30.7 mA/cm². X-ray photoelectron spectroscopy of the catalyst-bound working electrode before and after electrolysis confirmed the molecular stability during catalysis. The turnover frequency was calculated as 43.4 s⁻¹ using redox-peak integration. The kinetic and mechanistic aspects of the electrocatalytic reaction were further examined by computational methods. This study provides mechanistic insights into main-group-element electrocatalysts for heterogeneous small-molecule conversion.     

Application of DEM modified with enlarged particle model to simulation of bead motion in a bead mill

We applied the discrete element method （DEM） of simulation modified by an enlarged particle model to simulate bead motion in a large bead mill. The stainless-steel bead mill has inner diameter of 102 mm and mill length of 198 mm. The bead diameter and filling ratio were fixed respectively at 0.5 mm and 85%. The agitator rotational speed was changed from 1863 to 3261 rpm. The bead motion was monitored experimentally using a high-speed video camera through a transparent mill body. For the simulation, enlarged particle sizes were set as 3-6 mm in diameter. With the DEM modified by the enlarged particle model, the motion of enlarged particles in a mill was simulated.The velocity data of the simulated enlarged particles were compared with those obtained in the experiment. The simulated velocity of the enlarged particles depends on the virtual frictional coefficient in the DEM model. The optimized value of the virtual frictional coefficient can be determined by considering the accumulated mean value. Results show that the velocity of the enlarged particles simulated increases with an increase in the optimum virtual frictional coefficient, but the simulated velocity agrees well with that determined experimentally by optimizing the virtual frictional coefficient in the simulation. The computing time in the simulation decreases with increased particle size.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

Explicit finite difference simulations for accelerating cross diffusion flow over a perpendicular shield with parabolic motion

The heat transfer phenomenon subject to thermos-diffusion effects convey important applications in the heating processes, extrusion systems, chemical processes and various engineering systems. The objective of current work is to observe the contribution of Soret and Dufour effects in oscillating shield for cross diffusion flow. The perpendicular shield with oscillating motion induced the flow. The magnitude of oscillations is assumed to be small so that laminar flow due to oscillating shield has been resulted. The motivations for addressing the thermos-diffusion phenomenon due to oscillating of shield are due to applications in oscillatory pumps, moving surface, metal detectors, power systems etc. The dimensionless problem is obtained via introducing the appropriate set of variables. The numerical outcomes are suggested by using the most interesting explicit finite difference scheme. The physical illustration for flow parameters is presented. Moreover, the aspect of physical quantities involving the flow are graphically reported.     

A Series of Low-Coordinate Iron Selenido Complexes: Reactivity of a Linear Iron(I) Silylamide towards Selenium

A variety of different low-coordinate iron selenide complexes is reported. These are obtained by reaction of the linear iron(I) silylamide K{18c6}[Fe(N(Dipp)SiMe₃)₂] (Dipp=2,6-diisopropylphenyl) with red selenium. Careful adjustment of the reaction conditions results in the formation of unique low-coordinate selenido iron complexes, namely a monoselenide bridged [2Fe−1Se]²⁺ complex, as well as mononuclear iron per- and triselenides. Further, C−H bond activation of one of the silylamide ligands by a putative terminal iron monoselenide is observed.     

On a class of Riemann surfaces

It is considered the class of Riemann surfaces with dimT1 = 0, where T1 is a subclass of exact harmonic forms which is one of the factors in the orthogonal decomposition of the spaceΩH of harmonic forms of the surface, namely The surfaces in the class OHD and the class of planar surfaces satisfy dimT1 = 0. A.Pfluger posed the question whether there might exist other surfaces outside those two classes. Here it is shown that in the case of finite genus g, we should look for a surface S with dimT1 = 0 among the surfaces of the form Sg\K , where Sg is a closed surface of genus g and K a compact set of positive harmonic measure with perfect components and very irregular boundary.     

Comonotone approximation with interpolation at the ends on an interval

Let a function f ∈ C[-1, 1], changes its monotonisity at the finite collection Y := {y1,… ,ys} of s points yi ∈ (-1, 1). For each n ≥ N(Y), we construct an algebraic polynomial Pn, of degree ≤ n, which is comonotone with f, that is changes its monotonisity at the same points yi as f, and |f(x)-Pn(x)|≤c(s)ω2(f,(√1-x2)/n), x∈[-1,1],where N(Y) is a constant depending only on Y, c(s) is a constant depending only on s and ω2 (f, t) is the second modulus of smoothness of f.     

无机固态材料中气体元素分析的现状与进展

本文介绍了气体元素分析样品表面处理的最新研究成果,综述了热导法、红外吸收法、库仑滴定法、飞行时间质谱法和火花源原子发射光谱法等分析方法在无机固态材料气体分析中的应用现状,分析了各自的特点及存在的问题,并展望了气体分析的发展方向(引用文献85篇)。     

元素分析仪测定土壤、沉积物样品碳氮含量的影响因素及数据校正

使用元素分析仪进行土壤、沉积物样品碳、氮含量检测时,样品前处理过程(烘干和酸化)、包样质量以及参考标准品等因素均会对检测结果造成影响.试验结果表明:酸化导致氮百分质量的测定结果降低2.6%~40.0%,碳百分质量的测定受包样质量的影响较大,使用的校正标准与被测样品越相似,校正结果越准确.     

Dependency of dynamic interlaminar shear strength of composites on test technique used

Studies are presented on dependency of dynamic interlaminar shear (ILS) strength on the experimental technique used for a typical plain weave E-glass/epoxy composite. Dynamic ILS strength was determined based on two experimental techniques, namely torsional split Hopkinson bar (TSHB) apparatus using thin walled tubular specimens and compressive split Hopkinson pressure bar (SHPB) apparatus using single lap specimens. The results obtained from these techniques are compared. In general, it is observed that dynamic ILS strength for composites obtained by TSHB testing using thin walled tubular specimens is lower than the dynamic ILS strength obtained using single lap specimens in compressive SHPB. The issues involved in TSHB testing of thin walled tubular specimens made of composites are discussed and the reasons for reduced dynamic ILS strength using thin walled tubular specimens are highlighted. Finite element analysis (FEA) of thin walled tubular specimens made of composite and resin subjected to quasi-static torsional loading is presented. Using FEA results, the reasons for lower ILS strength of composite thin walled tubular specimens are substantiated.